Is the higher pressure of high-pressure rust cleaning machine, the better?

　　Emergence of high-pressure cleaning machines has further improved the work efficiency and effect of rust removal, paint removal, dirt cleaning, concrete removal and other industries. Using a high-pressure cleaner brings us convenience, but we should also pay attention to how to use it efficiently, not that the higher the pressure, the better.

　　The higher pressure of high-pressure washer, the higher requirements for the performance of components and tightness of device will be correspondingly increased, so, in this way, the cost will increase. Once the pressure is too high, when jet sprays on the surface of cleaning object, it is likely to cause water splashing, which will cause adverse phenomena to cleaning work. In this way, the effect of water pressure will be offset, and water may be atomized , As a result, the cleaning efficiency is not only reduced, but also cleaning effect is not ideal.

　　The pressure required for high-pressure cleaning should be comprehensively considered according to the specific requirements of work and the nature of dirt on the surface of cleaning object, the degree of corrosion, and the thickness of paint. The required pressure is the most scientific and reasonable. Nowadays, when cleaning with high-pressure water jets, the pressure is adjusted according to our required situation.

　　Excessive pressure of high-pressure cleaner also has an adverse effect on the bearing capacity of cleaning object, and it is easy to impact and damage the cleaning object. Therefore, when choosing a high-pressure cleaner, it is necessary to consider comprehensive practical aspects, and do not blindly pursue high pressure and deviate from the original purpose.

　　The high-pressure cleaning machine produced adopts Italian AR pump, Its maximum pressure can reach 600Bar, and is equipped with a pressure regulating valve imported from Italy, which can realize pressure adjustment within the range of 0-600Bar.